CLEANFIX is revolutionizing engine-cooling systems. Our reversing fan solutions clean radiators, contribute to optimal cooling and extend the lives of machines. CLEANFIX SELF-CLEANING FAN AgriTotal is the exclusive distributor for Cleanfix reversible fans in New Zealand. Cleanfix products are available through AgriTotal and our dealership network. CLEANFIX self-cleaning fans are commonly used around the world and here in NZ. OUR FANS CLEANFIX SELF-CLEANING FANS Maximize cooling efficiency and minimize downtime with Cleanfix self-cleaning fans. Unlike traditional fans, Cleanfix reverses blade pitch for powerful cooling and cleaning — boosting performance, reducing fuel costs, and optimizing autonomy. Through the evolution of diesel emissions regulations, countless hours and dollars have been invested in optimizing the design of cooling packages to balance performance, physical size, and serviceability. A high performing cooler will have a trade-off in serviceability, an easy to clean cooler will be too large for the application, a smaller cooler will not meet the heat rejection requirements… a vicious circle. Add now to the mix the introduction of automated machine operation, where a clogged cooler is now possibly hours of down-time and (lost revenue!) to have a person travel to the machine for service. Evolution of Reversing Fans The traditional solution to some of these issues is to use a hydraulic reversing cooling fan. These systems have proven to be durable and somewhat effective in keeping coolers clean and machines running efficiently, but only somewhat. The reversing of the fan rotation does reverse the flow of air through the core, but at only a fraction of the efficiency with which the fan cools. The net result is a severe reduction in cooling performance during the relatively long cleaning cycle. The hydraulic drive system is effective to allow for fan reversal but also comes with a compounding factor of inefficient cleaning and hydraulic system losses. These are the compromises once the machine is in the customer’s hands; there are many more that affect the entire manufacturing process. First is cost; hydraulic drive systems are very reliable, but the combination of pumps/motors/hoses/adapters soon adds up in product costs. Second is part count; the typical hydraulic fan drive system can introduce up to 5x more parts to the fan drive alone. These additional components require sourcing, logistics for delivery, floor-space within the manufacturing organization, and labor to assemble. Third is complexity; with each component added the fan drive system, another line is added to the FMEA (not including control strategy programming!). Revolutionary Design for Optimal Cooling Efficiency A unique solution is available to address these considerations; the Cleanfix® fan. The Cleanfix® fan is not a reversing fan; it is an engine mounted, belt driven fan that fully reverses the blade direction on command while the fan continues to spin in the same direction. This allows for the air flow to reverse direction (at any engine speed or power level) and produce the same pressure and flow characteristics for cleaning the coolers as was designed for cooling. This same technology can be applied to vary the attack angle of the blades, matching fan power to the cooling requirements. This operating principle also brings advantages over the most advanced viscous clutch fan drives as well. Cleanfix® fans are direct driven from the belt drive, eliminating the slip-losses associated with a viscous clutch. The effect of Autonomy Cooling system maintenance has always been at the very best a begrudging experience. The main initiator being the machine operator; either a warning light or buzzer is active, or the cabin air conditioning unit ceases to function due to a clogged condenser. In either case it is a sensory input to the operator which initiates the dirty job of cleaning the cores. With the rapid adoption of autonomous control, those sensory inputs are replaced with electronic monitoring and telematic systems. With all the advantages that this brings; the absence of an operator also means that there is no longer on-site maintenance at hand. The prospect of a simple blow-out of the cooling system being possibly hours away eats into the payback proposal that autonomous operation presents. A Cleanfix® self-cleaning fan system removes this concern by automatically cleaning the cooling system on a pre-determined schedule. Even if the cleaning interval is in the hours, the time savings of the person attending to the regular fuel and lubricant needs of the machine are quite measurable when avoiding cooler clean out. Smaller Cooling Packages, Constant Cooling Performance A scheduled, automatic clean out cycle combined with the availability of high power cleaning can have a direct correlation to overall cooling package size. Without the worry of trash loading on the cooler face, or dust loading in the fins, a tighter fin spacing and/or more aggressive fin profiles can be used than with other fan drive technologies. An additional benefit of the Cleanfix® fan system is that there is very little loss in cooling performance during the self-cleaning cycle. Hydraulic fan drives must reduce fan speed to zero, then reverse the fan direction (to operate in an inefficient manner) to achieve the cleaning cycle. During this time there is a marked decrease in cooling system performance, leading to potential heating issues in high power / high ambient temperature applications. With the quick action of the Cleanfix® blade reversal, there is nearly zero time with no air flow. The patented blade articulation also ensures the same fan performance during the cleaning cycle as in the normal cooling position. These features combine for seamless operation, regardless of engine load or ambient temperature. Cost-Effective Integration with Minimal Maintenance Integrating Cleanfix® fans into a cooling system design offers considerable cost advantages. Unlike hydraulic systems that involve expensive components and complex installations, Cleanfix® fans are simple to install and require minimal upkeep. The simplicity and low cost of integration make Cleanfix® fans an excellent solution for Off-Highway OEMs aiming to reduce the complexity and expense of their engine cooling systems. Moreover, Cleanfix® fans lower the risk of costly downtime and repairs. With fewer moving parts and a reliable, self-contained design, the risk of failure is significantly reduced compared to other fan drive systems. Regular Radiator Cleaning Is Crucial for Efficiency Maintaining clean radiators is essential for optimal cooling performance and minimizing fuel consumption. Partially plugged radiators can cause a substantial, hidden parasitic loss in engine power. Increased air restriction causes a higher fan inlet static pressure for a given air flow. To compensate for the reduced cooling capacity of a partially plugged radiator, the fan must work harder, which results in considerable energy loss. For example, a 5-6 kW increase in parasitic loss (not uncommon) can increase fuel consumption by 1.5 to 2.0 liters per hour. Cleaning radiators frequently reduces these inefficiencies and minimizes the risk of engine damage, maximizing fuel efficiency. - ( 6KW = 250g/kwh x 6 = 1500g/h x 0,85 kg/l = 1,8 l/h) THE CLEANFIX ADVANTAGE 01 REDUCED MACHINE DOWNTIME Automatic radiator cleaning means no more stopping work due to blocked radiators. The unique way the Cleanfix fan blades reverse means only Cleanfix can give maximum radiator cleaning performance. Cleaning all the way through even multi-layered cooling packs. Engine coolant, hydraulic oil and even air conditioning condensers all benefit from regular cleaning keeping your machines working harder for longer. 02 LOWER MAINTENANCE COSTS Reducing engine and hydraulic overheating issues leads to increased component life and fewer breakdowns. The precise airflow produced by Cleanfix Thermo-Control fans maintains optimum operating temperatures for reduced strain on the engine and hydraulic components. Cleaner air conditioning condensers maximise HVAC efficiency and reduce the load on the cab HVAC system resulting in reduced maintenance requirements. 03 HEALTHIER MACHINE OPERATORS Manual radiator cleaning is dirty work and potentially harmful to human health. Removing this task keeps the machine operator in the safe, clean environment of the cab. Improved air conditioning efficiency keeps them cooler and more comfortable too. Machines working in composting, waste recycling and demolition environments can have radiators clogged with material containing asbestos, bacteria spores or other hazardous materials. These are released in higher concentrations when the radiators are cleaned out manually presenting an even higher risk to the operative. 04 REDUCED FUEL CONSUMPTION When radiators are kept clean they are much more efficient. This allows the Thermo-Control Cleanfix variable pitch reversing fan to run at lower blade angles consuming less fuel. By automating the cleaning process radiator efficiency is continually maintained maximising the fuel-saving effect. Traditional viscous clutch fans deal with clogged radiators by increasing their speed in order to maintain the required airflow. This dramatically increases the power draw of the fan as well as increasing the amount of debris drawn into the radiator! 05 INCREASED POWER OUTPUT Diesel engine cooling fans can consume Huge amounts of horsepower generating the high airflows required in modern machines cooling packs. Being able to precisely control the pitch of the fan blades and automatically keep radiators clean makes the Cleanfix reversible fan incredibly efficient. This minimises the power consumption of the fan. Reduced cooling fan power leaves more useful engine power output increasing productivity. OUR FANS CLEANFIX SC - STANDARD CONTROL CLEANFIX FT/HT - PULSTRONIC/HYTRONIC CLEANFIX VP - VARIABLE PITCH CONTROL ELECTRONICS CLEANFIX SF - SEASONAL REVERSING FAN CLEAN GENIUS For more information: www.cleanfix.org . DOWNLOAD CLEANFIX BROCHURE OUR FANS Cleanfix has been an 'approved allied supplier' for John Deere since 2016 More info... Reversible Fans For Radiator Cleaning Clean radiators. Save fuel. Cleanfix in agriculture: DEUTZ-FAHR 7250 TTV Warrior tractor. CASE JX 95 equipped with CLEANFIX reversible fan. CASE STX Steiger 435 equipped with CLEANFIX reversible fan. CASE IH 7120 epuipped with Cleanfix reversible fan. For more information about products, accessories or prices, please contact us.

AgriTotal is New Zealand's exclusive importer of Zuidberg Frontline Systems and accessories for agricultural machines. ACCESsORIES For performing front work with increased reliability, ease and efficiency. Adding Zuidberg smart accessories and attachments to your front linkage and front PTO improves reliability, ease and efficiency of your work. You can do this by adding an ECO-Twin PTO, an accumulator and a pressure gauge, easy float or front controls. View the options below. Eco-Twin PTO Accumulator Weight Carrier Front Remote Control Position Limiter Kit Chain Hangers Front Double Acting Services Lines Lowering Speed Control System Eco-Twin PTO The ECO-TWIN PTO was designed based on the knowledge that current tractors can supply the same power even at a lower rpm. That is why this front PTO has the option to switch between ‘normal transmission’ and ‘eco-transmission’ from the cabin, allowing the engine speed to be reduced to approximately 1600 rpm. With the ECO-TWIN front PTO, you now have a choice between two speeds for the PTO: 1000E rpm saves up to 20% in fuel 1000 rpm provides maximum engine power Benefits Fuel savings of up to 20% Choice between 1000 and 1000E rpm Reduced noise levels Independent research has shown that the switchable ECO-Twin PTO saves up to 20% in fuel.* (*) The test results have been taken from research carried out by PPP-Agro Advies in collaboration with Wageningen UR Livestock Research (University & Research centre). The study showed that with the ECO-TWIN PTO, a minimum of 10%, up to a possible 20%, of fuel can be saved when compared to a front PTO with a ‘normal’ transmission of 1000 rpm Return to Top Accumulator The Accumulator is available as an expansion to Zuidberg front linkages and offers additional protection to the tractor, equipment and front linkage. The Accumulator absorbs peak loads, resulting in increased comfort levels and a prolonged service life of the tractor and equipment. In addition, the newly designed throttle prevents the tractor’s jumpy behaviour during transport. Smart features of the Accumulator Protects the tractor, equipment and front linkage against large peak loads Prevents jumpy road behaviour Optimum driving comfort Equipment loading and unloading possible Return to Top Weight Carrier The three-point weight carrier is specially developed for mounting the basic weight of the tractor, which is removed when mounting the front linkage. The weight carrier is tractor-specific and, depending on the tractor type, the weight to be added to the weight carrier varies between 700 and 1600 kg. Smart features of the Weight Carrier Tractor-specific design Weight to be added from 700 to 1600 kg Three-point absorption for the tractor’s basic weight Return to Top Front Remote Control The front control system has been developed to operate the front linkage from outside the cabin, e.g. while hooking up and disconnecting equipment. These front control systems have a tractor-specific design and come with a variety of features. Ask your dealer about the possibilities for your tractor. Front control systems in various versions and sizes: For controlling the front linkage outside the cabin For controlling the front linkage outside the cabin with a height limiter For controlling the front linkage outside the cabin with adjustable lifting and lowering speeds For controlling additional hydraulic functions outside the cabin Return to Top Position Limiter Kit (P. L. K.) The position limiter set is available as an expansion to Zuidberg front linkages and offers an adjustable height or depth limiter, depending on the mounting method of the valve on the multi-valve. Use of the position limiter set results in increased ease of working and eliminates the adverse impact of unacceptably high or low positions of the front linkage. Smart features of the position limiter set: Can be mounted as a height limiter or depth limiter, depending on the mounting method of the valve on the multi-valve The valve can be mounted directly onto the multi-valve already present Position limit can be set on lifting frame Can be used on all Zuidberg front linkage systems that have a cast-iron lifting frame System can be activated using a switch mounted in the cabin Return to Top Chain Hangers The chain hook set is available as an expansion to Zuidberg front linkages and holds chains or springs that are used to reduce the load on front equipment. The chain hooks offer various options for attaching the chains or springs and are mounted at the right height and width to optimise the load reduction on the equipment. The chain hook set may include the following smart features: Design matching the tractor, bonnet or front linkage Easy access of lubrication points is maintained Uninterrupted beams of the headlights are retained Extra high chain hooks for tractors that are frequently used on hilly terrain Return to Top Front Double Acting Services Lines The front hydraulic system is available as an expansion to Zuidberg front linkages and offers the possibility to hydraulically operate equipment. A Zuidberg front linkage is often pre-designed for mounting one or more front hydraulics sets for optimum integration in the top plate. Customised front hydraulics: Hydraulic hoses at the correct length Banjo eye and nipple connection for easy mounting Quick release with dust cover Supplied ready for use Some tractors can also be equipped with a front control system, with the option to control the front hydraulics outside the cabin. It is therefore important to always ask your dealer about the possibilities for your tractor. Return to Top Lowering Speed Control System The Lowering Speed Control Set is available as an expansion to Zuidberg front linkages and offers the possibility to adjust the lowering speed of the front linkage as desired. The set has been designed to be connected directly to the multi-valve, but can also be used with a 12 mm pipe connection. If the multi-valve is in the single operating position, the oil flow can be adjusted as desired using the blue button, also changing the lowering speed of the front linkage. Lowering Speed Control Set, the power of simplicity: Easy to mount and use Mounting possible on every Zuidberg front linkage, also on models already supplied. Can also be mounted to a standard 12 mm pipe if there is no room at the multi-valve (hydraulic couplings are not supplied) Return to Top Top Frontline Accessories Eco Twin PTO Accumulator Weight Carrier Front Remote Control Position Limiter Kit Chain Hangers Front Double Acting Services Lines Lowering Speed Control System Front Linkage Systems PTO Systems

AgriTotal is New Zealand's exclusive importer of Zuidberg Frontline Systems for narrow tractors. Suitable for horticulture, orchards, kiwi fruit farms, and more Frontline systems for narrow tractors Horticulture, orchards, vineyards, kiwifruit farms tractor accessories for every job. Zuidberg supplies frontline systems for a wide range of compact tractors. Attachments such as mowers, sweepers, and special built equipment are more used on the front of the tractor. Ask us about the possibilities for your tractor. Zuidberg front linkage systems will fit most tractor brands including: Case, Claas, Deutz, Fendt, Iseki, John Deere, Kioti, Kubota, Landini, Massey Ferguson, Mc Cormick, New Holland, Same, Tym. FrontLine is a comprehensive range of front linkages and power drive systems from Zuidberg designed to maximise the efficiency and versatility of your tractor. The Zuidberg range is also suitable for horticulture, orchards, vineyards and kiwi fruit farming. These are OEM or retro fitted. Ask us about your best option. GALLERY For further information about products or prices, please contact us.

AgriTotal is New Zealand's exclusive importer of Zuidberg Frontline Systems for agricultural machines. Check out the Zuidberg range of front linkage solutions. TRACTOR Front linkage Systems Innovative front linkage systems for almost every tractor make and model. Lift cylinder All lift cylinders are provided with a hardened, chrome plated piston rod. Industrial spherical greaseable and replaceable bearings are used on both ends of the cylinder. These bearings guarantee a long life without play. Finishing All parts of the linkage are de-burred and hot phosphate before being electro-statically sprayed with two component paint. Ball ends All Zuidberg's front linkages have, except for a few models, Walterscheid ball hook ends (balls included). This allows safe and reliable mounting and dismounting of implements. Also, Zuidberg has the widest range of front linkage systems for narrow tractors, suitable for: horticulture, orchards, vineyards and kiwi fruit farming. These are OEM or retro fitted. Ask us about your best option. PTO Systems FrontLine Accessories

Use our searc tool to find the right PTO and linkage match for your tractor. FIND THE RIGHT LINKAGE AND PTO FOR YOUR TRACTOR FIND MATCH NOW!

AgriTotal is New Zealand's exclusive importer of Zuidberg Frontline Systems for agricultural machines. Front PTO Systems The Zuidberg front PTO meets the strictest engineering standard. AgriTotal is New Zealand’s importer of Zuidberg Front-PTO systems. Zuidberg PTO Systems provide power delivery to the highest technical standards. The PTO features an internal oil immersed multi-plate clutch. Engagement of the clutch is controlled by a proportional and adjustable engagement system. This guarantees a smooth uptake of power to the front mounted implements. When disengaged the PTO is braked but to help connection of machines the PTO output shaft features the ECON connection system. ECON allows the user to manually turn the output shaft through 60 degrees when linking up a machine. Each tractor brand has unique front PTO specs and Zuidberg cater to most, plus offer custom builds. Their range is extensive with various speed switch ECO PTOs, and cater to both left and right direction of rotation versions. The PTO has its own integrated oil system requiring no external oil supply from the tractor. Fitting times of the PTOs are reduced and reliability is increased with this system. For almost every type of tractor there is a Zuidberg Front PTO available. Zuidberg provide the broadest range of Front PTO's available. For higher power delivery applications, the Zuidberg PTO is supplied with an oil cooler. The oil cooler allows the gearbox to maintain correct operating temperatures even in extreme operating conditions. The PTO output shaft is braked when disengaged eliminating shaft drag in cold conditions. Due to the customized design of the Front PTO systems each input drive shaft is designed with service in mind. Using different driveshaft combinations, replacement of items such as V belts is made easier. Save up to 20% on fuel with the ECO-Twin front PTO Front Linkage Systems FrontLine Accessories

AgriTotal is New Zealand's exclusive importer of Zuidberg Track Systems for agricultural machines and tractors. View their range today. Top Track Systems FOR TRACTORS FROM 160HP + FOR TRACTORS FROM 160HP + Reduced soil pressure thanks to rubber tracks A larger surface means reduced soil stress Rubber tracks offer a larger soil surface and, therefore, a lower soil stress than pneumatic tyres. Compaction of the topsoil layer is therefore reduced; this means that rubber tracks are more soil-friendly than pneumatic tyres. The differences between rubber tracks and pneumatic tyres are also measurable through deeper soil analysis. It has been demonstrated that the soil is less compact at all depths after rubber tracks have been used, in comparison with pneumatic tyres. Enquire now for more information Proven solution Rubber tracks generate less compaction than low-pressure tyres Important for you as a user: Rubber tracks cause less soil compaction: up to 44%* less compared to special low-pressure tyres (measured in kg/cm2 at a depth of 20cm ). Compaction in lower soil layers cannot be solved by using rubber tracks alone; the overall weight of machines also needs to be reduced. Brochures Case IH Tracks Track Set Fendt 200 Series 1/1

AgriTotal is New Zealand's exclusive importer of TRILO groundskeeping machines and accessories. MAREDO-ST SERIES Tool Carrier STrac 700-720 Milling Unit ST170 Scarifying Unit ST200-201 Back to Maredo Tool Carrier STrac 700-720 Tool Carrier Maredo STrac 700-720 Tool carrier STrac 700-720. The completely unique series of MAREDO ST surface finishing machines is the result of a carefully thought-out and innovative development, based on the wishes of the market. By listening carefully to the customer and with care and an eye for detail, the STrac700 & STrac 720 is the sum of careful research, in combination with the use of high-quality technology. The result may be there! The leading role in the ST series machine is reserved for the base unit STrac 700-720. The STrac 700-720 are self-propelled tool carriers that can be equipped with multiple tools for surface treatment. Model Strac 700 is equipped with a Honda petrol engine with a power of 9 hp and recoil start; the model STrac 720 is equipped with a Honda petrol engine with a capacity of 13 hp and an electric start. Technical specifications STrac 700: Honda petrol engine, 9 hp, repetitive start STrac 720: Honda petrol engine, 13 hp, electric start Minimum width 90 cm Maximum width 130 cm Total machine length 200 cm Weight without add-on units 245 kg Engine power 9 & 13 hp Speed forward 0-6 km/h Reverse speed 0-4 km/h Characteristics Very short turning circle Hydraulic lifting device with floating position Change tools without using tools Constant working speed using the cruise control Implements float fully in working position Very short turning circle Hydraulic lifting device with floating position Change tools without using tools Constant working speed using the cruise control Implements float fully in working position You can use the multifunctional basic tool carrier in combination with a cultivator, scarifier, aerator or a handy seeder. All attachable units (change without the use of tools!) float fully in working position and are mechanically driven via a PTO and heavy duty chains or belts (depending on the model). Equipped with a hydraulic lifting device with floating position as standard. Fitted with a hydrostatic forward/reverse with standard cruise control. Multiple rear wheel positions, quick to change. All implement controls are located on the handlebar. Standard with automatic PTO engagement function. ST units can be quickly connected/disconnected without tools. Enquire Milling Unit ST170 Milling Unit ST170 for tool carrier Maredo STrac Milling unit ST170. This cutter 'strips' the top layer of the turf. After the treatment, an even and flat area remains. Treated area can be overseeded immediately after clearing. Unique system of slanted bushes between the blades. Ideal for bad spots or other poor turf. Technical specifications Working width 66 cm Working depth 0-10 mm Weight 70 kg Standard blade spacing 0 mm Standard sheet thickness 3 mm Working speed up to 3 km/h Characteristics Very short turning circle Change tools without using tools Constant working speed using the cruise control Implements float fully in working position Enquire Scarifying Unit ST200-201 for tool carrier Maredo STrac Scarifier ST200 and ST201. This ST scarifier guarantees perfect cutting quality thanks to the design of the blades in combination with the speed. You can choose a version with 2.3 mm blades (ST200) @ 40mm or 1.4 mm blades (ST201) @30 mm. Supplied as standard with seven carbide cutting tips per blade. Reverse-rotating blades (rotation against the direction of travel) removes more material with minimal damage to the turf. Easy depth adjustment by turning quick adjusters. Equipped with a heavy duty, maintenance-free chain drive. Ideal for heavy scarifying work, verticutting or just a light grooming treatment. Technical specifications Working width 66 cm Working depth 0-25 mm Weight 65 kg Standard blade distance 40 mm Standard sheet thickness 2.3 mm Working speed up to 6 km/h Model ST200: 2.3 mm blades ø40 mm Model ST201: 1.4 mm blades ø30 mm Characteristics Blades rotate against the direction of travel Quick depth setting Constant working speed using the cruise control Implements float fully in working position Change tools without using tools What can sometimes be difficult with the 'ordinary' spike aerators is the fact that a lot of weight has to be used to push the spikes into the soil and the holes produced do not look good. This is always a problem for small machines because weight does not benefit a small machine. To solve this problem, Maredo developed an innovative technique that uses vibrations to drive the spikes into the ground without needing much weight. The six independent spike sections are mounted on a camshaft. As soon as this shaft is driven, the rolling spikes begin to vibrate. These vibrations help the spikes get into the ground. When the spikes are fully pushed into the soil, the vibrating spikes loosen the soil. Loosening the soil is important for reducing soil compaction and achieving healthy grass growth. It is possible to use the aerator GT210 at mowing speed, after which you can immediately play on the greens again. No disruption to players! Enquire Scarifying Unit ST200-201 Aerator Unit ST210 for tool carrier Maredo STrac Aerator ST210. This special aerator is equipped with a unique scarifying system with vibrating spikes. The six vibrating spike sections per ST210 break soil compaction. The vibration system ensures optimum spike penetration, pushes the spikes through hard layers and ensures active aeration. The vibration leaves a nice clean hole, without disturbance. The spikes roll over stones and other hard objects. Technical specifications Constant working speed using the cruise control Implements float fully in working position Change tools without using tools Characteristics Working width 66 cm Working depth 0-60 mm Spike spacing 52mm Spike thickness 4 mm Working speed up to 6 km/h Weight 80 kg Enquire Aerator Unit ST210 Aerator Unit ST230 for tool carrier Maredo STrac 700 Aerator unit ST230 HighSpeed-Corer. The ST230 high-speed corer aerator is an attachment with a special new geometry that allows high crankshaft rotational speed. The teeth create very neat holes, without disturbance. Working width 66 cm. Maximum working depth 75 mm. Hole distance from side to side 52 mm. Weight 80 kg. Supplied as standard with 12 mm/ 1/2" OD hollow teeth. Working speed up to 4 km/hr. Capacity up to 3/4 million holes per hour. Technical specifications Working width 66 cm Working depth max. 75 mm Working speed up to 4 km/h Hole distance 52 mm Weight 80 kg Standard with 12mm OD hollow teeth Capacity up to 3/4 million holes/hour Enquire Aerator Unit ST230 Sowing Unit VibeDiscSeeder ST410-418 for Maredo tool carrier STrac Seeder ST410 & ST418. The Maredo ST410 and ST418 are typical disc seed drills. The vibrating, thin, cutting discs pre-cut a slot. The discs, small and in a V-shape, open the slot; the seed falls accurately into the opened slot. The rear roller follows to close the slots. The dosage is adjustable by switching the gears. Model ST410 is suitable for Bentgrass. Model ST418 is suitable for Fescue/Rye Technical specifications Working width 66 cm Working depth 0-20 mm Weight 90 kg Slot distance 42 mm Seed container capacity 6 kg Working speed up to 6 km/h Dosage adjustable 2-15 gr/m² Characteristics Constant working speed using the cruise control Implements float fully in working position Change tools without using tools Model ST410 is suitable for Bentgrass Model ST418 is suitable for Fescue/Rye Enquire Sowing Unit VibeDiscSeeder ST410-418 Sowing Unit VibeSpikeSeeder ST420-424 for Maredo tool carrier STrac The Maredo ST420 and ST424 are simple overseeders. The vibrating, thin spikes ensure clean holes at the right depth. The seed is sown on top of the holes as a brush brushes the seed into the holes. The dosage is adjustable by switching the gears. Working width 66 cm / Working depth 0-15 mm Weight 80 kg / Slot distance 42 mm / Seed box capacity 6 kg / Working speed up to 6 km/hour Dosage adjustable 5-15 gr/m² Model ST420 is suitable for Bentgrass Model ST424 is suitable for Fescue/Rye Technical specifications Working width 66 cm Working depth 0-15 mm Weight 80 kg Slot distance 42 mm Seed container capacity 6 kg Working speed up to 6 km/h Dosage adjustable 5-15 gr/m² Characteristics Constant working speed using the cruise control Implements float fully in working position Change tools without using tools Model ST420 is suitable for Bentgrass Model ST424 is suitable for Fescue/Rye Enquire Sowing Unit VibeSpikeSeeder ST420-424 Sanding Unit ST160 for tool carrier Maredo STrac Sanding machine ST160. This sanding machine processes pre-cut slots with vibrating discs. Secondary discs open the pre-cut slots. The sand is led into the trenches up to 25 mm. Ideal for bad spots or other problematic lawns. Very clean cuts with minimal surface disturbance. Adjustable and accurate dosing of sand. Available around mid 2023. Technical specifications Working width 66 cm Working depth 0-25 mm Weight 70 kg Standard disc spacing 42 mm Working speed up to 3 km/h Characteristics Very short turning circle Change tools without using tools Constant working speed using the cruise control Implements float fully in working position Enquire Sanding Unit ST160

AGRITOTAL SUPPLIES PATEER PARTS. TAKE A LOOK AT OUR RANGE HERE PATEER FRONT WEIGHTS ST - STEEL RANGE B SERIES - CAST IRON RANGE MUFO 2 - CAST IRON RANGE BF RANGE - FENDT DESIGN FP BBL - CAST IRON RANGE FP BBL HDC - INTEGRATED STORAGE NEW RT - FP-HPDE POLYETHYLENE RANGE RT CB - FP-HDPE - POLYETHYLENE RANGE DEUTZ FAHR - 800,1000,1200 ST - STEEL RANGE Description The result of our ongoing commitment to offering innovative, high-quality products that are accessible to all budgets, the ST RANGE is the successor to the former FP-WEL steel range. Particularly well thought-out in terms of design, size and front adhesive marking (striking, neat, eye-catching), the ST serie is resistant, versatile and contemporary. Advantages Steel, a guarantee of quality: resistant to impact, weathering, crack propagation and deformation Robust et durable Perfect finish With its modern design and smooth, clean surfaces, the ST counterweight gives a perfect finish to the tractor's overall appearance. Its clean lines are in perfect harmony with the sleek, powerful styling of today's models. Attractive front adhesive branding, customizable for brand, dealership or end customer. Modular → available in an upgradeable model with a casted add-on unit to be inserted from below for consistent integration Description The result of our ongoing commitment to offering innovative, high-quality products that are accessible to all budgets, the ST RANGE is the successor to the former FP-WEL steel range. Particularly well thought-out in terms of design, size and front adhesive marking (striking, neat, eye-catching), the ST serie is resistant, versatile and contemporary. Advantages Steel, a guarantee of quality: resistant to impact, weathering, crack propagation and deformation Robust et durable Perfect finish With its modern design and smooth, clean surfaces, the ST counterweight gives a perfect finish to the tractor's overall appearance. Its clean lines are in perfect harmony with the sleek, powerful styling of today's models. Attractive front adhesive branding, customizable for brand, dealership or end customer. Modular → available in an upgradeable model with a casted add-on unit to be inserted from below for consistent integration Return to Front Weight Menu B SERIES - CAST IRON RANGE Description A guarantee of quality ; shock, crack propagation and deformation resistant ; lasts through time. B line is highly modular and provides a wide variety of weights. Advantages Compact units with minimum projection A tool carrying frame adds further possibilities for combined transportation A 400, 600kg or 800kg add-on weight bolted to the front of any of the base units provides extra flexibility Technical Characteristics Dimensions Standard equipment Suitable for front linkage (300kg model is suitable for cat. 1 & 2 linkages / specialist tractors) Integrated coupling jaw to the 3rd link Optional equipment 400, 600 or 800kg add-on weight Bumper of any of our ranges (TRACTOR-BUMPER CONNECT on B 600 and B 900kg models / B-PROTECT on any model / BUMPY on any model) Tool carrying frame Fp-Box storage compartment Dealer logo Return to Front Weight Menu MUFO 2 - CAST IRON RANGE Description A guarantee of quality ; shock, crack propagation and deformation resistant ; lasts through time. Mufo-2 range is characterised by its modern design, in perfect harmony with tractor’s bodies. Advantages Very compact, with minimal forward extension to the linkage arms Mounted to front linkage or directly to weight frame A 500kg add-on weight fixed to the front of any of the base units provides extra flexibility Technical Characteristics Dimensions Standard equipment Suitable for front linkage Integrated coupling jaw Optional equipment Back plate to mount directly to the tractor weight carrier 500kg add-on weight Fp-Box storage compartment Dealer logo Return to Front Weight Menu BF RANGE - FENDT DESIGN Description The exclusive Pateer Fendt cast iron weight meets the very highest quality standards and stands as a guarantee of resistance to shocks and exceptional durability. Advantages The Fendt range is very compact. Its rounded side (400 and 870kg) can be mounted either forwards or backwards. The notches on the 870 and 1400kg models allow the addition of 400 or 600kg weights from the B range, or Fendt jerrycan Available weights 400kg - 870kg - 1250kg - 1400kg - 1800kg - 2500kg Return to Front Weight Menu FP BBL - CAST IRON RANGE Description Our new FP-BLL combine pleasing, modern design with outstanding quality, durability numerous practical advantages and a wide range of capacities. Cast iron weights are resistant to impact, time, crack propagation and deformation, which is a guarantee of quality. Very cleverly designed, it incorporates a generously proportioned toolbox compartment with a capacity of some 80 litres. ADVANTAGES Aesthetically pleasing 80L Storage space on the top With 400, 600 and 800kg add-on weights available on the front and 500kg underneath, provides the weight capacity to suit your tractor and application. Technical features Standard equipment Front linkage fixing including: - 3rd link ⌀25mm pin - Coupling jaw to the 3rd link 80LStorage space integrated - Box size : 980 x 230 x 310 OPTIONAL EQUIPMENT 400, 600 or 800kg additional front weight to be mounted with weight holder (case iron range B) 500kg additional weight to be mounted from below Sliding elements make it possible to adjust wings size according to the size of the tractor Fp-Box storage box Safety kit with position indicators, limiting lights, reflective strips Fp-Box storage compartment Dealer logo Return to Front Weight Menu FP BBL HDC - INTEGRATED STORAGE Description Don’t worry about juggling all your tools while driving your tractor. This ballast box will neatly store your gear and accessories, as it’s very cleverly designed and comes with an integrated storage compartment. Made of magnetite, an innovative, high quality material (density 2.5 times greater than reinforced concrete), the price is affordable. Advantages 73L Storage compartment on the top Weights available: 1000kg | 1200kg | 1400kg the external dimensions and profile of the block remain the same throughout the range, due to the composite construction allowing material density to be increased, rather than the physical size of the block, to provide additional capacity Clean, modern, aesthetically pleasing with advanced properties that deliver important benefits TECHNICAL FEATURES Standard equipment Front linkage fixing kit Coupling jaw to the 3rd link 73-litre toolbox storage area Optional equipment Bumper function (adjustable sliding elements) Enhanced security kit (Soft limiting lights, reflective strips) Return to Front Weight Menu NEW RT - FP-HPDE POLYETHYLENE RANGE Description The new RT weight range combines a highly innovative polyethylene outer shell filled with a variable density concrete core. • The outer shell, produced according to the specificities of the rotomolding technique, is resistant to shocks, time, cracks and chipping. • Its modern and sleek curves give a very accomplished appearance matching the general appearance of today's tractor, compact, powerful and ergonomic. • Branded Plastron (tractor's brand logo and color). • Optional: Branded frontal polycarbonate plate (instead of plastron) - tractor's logo or dealer's logo RT range offers basic models (see RT) or models with integrated storage compartment (hereafter) Advantages High-density polyethylene outer shell, a material that combines strength, exceptional durability and zero maintenance Integrated storage compartment (740x270mm - Ht 300mm) Low environmental impact Economic Unalterable color, even in the event of shocks, scratches, scrapes or scratches Technical caracteristics Return to Front Weight Menu RT - CB DESCRIPTION From high density polyurethane (HDPU), a material that combines strength, exceptional durability and zero maintenance The geometric lines emit a modern, pleasing and balanced design and give a very accomplished look to the overall look of today's compact, powerful and ergonomic tractor ADVANTAGES Solid : Shock absorbing Resistent : it is not afraid of rust, impact, time, cracks and deformation. Colors unalterable : Material that does not peel Low environmental impact : no painting stage. Made from recycled materials (plastic shell and concrete filling) TECHNICAL FEATURES Standard equipment Front linkage mounting kit -cat. 2 from 400 to 1200kg (piton plate) Coupling jaw to te 3rd link Eco Friendly Utilization of production surpluses Crusher for sorting, cutting, crushing of polyethylene Integration of regenerated PE French manufacturing Suppliers located within a maximum radius of 1000 km from production sites Return to Front Weight Menu DEUTZ FAHR 800 - 1000 - 1200 Description Our new DEUTZ-FAHR concrete weight, in perfect harmony with the bodywork, gives a very accomplished finish to the overall look of the DEUTZ-FAHR tractor. Designed with elegant and sleekly muscled lines, it perfects DEUTZ-FAHR tractor's aggressive and sharp look Available in 800kg, 1000kg and 1200kg. Advantages Special DEUTZ-FAHR design, attractive and contemporary Affordable Perfect finishing quality Return to Front Weight Menu

CLEANFIX is revolutionizing engine-cooling systems. Our reversing fan solutions clean radiators, contribute to optimal cooling and extend the lives of machines. CLEANFIX Reversible FANS AgriTotal is the exclusive distributor for Cleanfix reversible fans in New Zealand. Cleanfix products are available through AgriTotal and our dealership network. CLEANFIX reversible fans are commonly used around the world and here in New Zealand. CLEANFIX REVERSIBLE FANS CLEANFIX reversible fans are used in agricultural, construction, municipal, forestry and recycling machines such as tractors, handlers, excavators, wheel loaders, harvesters, combines, sprayers, dozers, skid steers, and a variety of other industrial equipment. CLEANFIX equipped machines are valued for their maintenance free, automatic radiator cleaning and significant fuel savings. CLEANFIX variable pitch fan also contribute to optimal cooling and extended vehicle lives. The quality and performance of CLEANFIX reversing fans are confirmed by well know manufactures such as JOHN DEERE,MASSEY FERGUSON, NEW HOLLAND, CASE, CLAAS, KUBOTA, KRONE, MERCEDES BENZ, BOMAG FAYAT GROUP, CATERPILLAR, KOMATSU, HITACHI, HYUNDAI, SUMITOMO, DOOSAN, CASE CONSTRUCTION, MANITOU, HAGIE, OXBO, ETC. These manufactures incorporate CLEANFIX fans as standard factory installations or optional equipment. CLEANFIX is revolutionizing engine-cooling systems. Their multi-patented reversing fan solutions clean radiators, contribute to optimal cooling and extend the lives of machines in high-dust environments. CLEANFIX enables for less downtime, significant fuel savings and increased efficiency of an operation. CLEANFIX AgriTotal is New Zealand’s importer of premium European agricultural and professional turf care machines. We supply the biggest range off Frontlinkage & PTO systems and Reversible radiator cooling fan systems in New Zealand. For the Golf & Turfcare professional we supply a wide range off maintenance machinery. For sales, technical support, expertise, service, training, and on-site installs, contact AgriTotal today. We'll keep you moving! AgriTotal offers CLEANFIX reversible fans for most mobile vehicles that can be exposed to dusty or contaminated conditions. The blow function reliably frees the cooling packages of grass, crop residue, leaves, wood chips, sawdust, humus, earth and lime. They even remove an ice pack from the grill. Also, the innovative fans help to prevent problems associated with overheating and engine inefficiencies. CLEANFIX is used in: • Agricultural machinery and tractors • Construction machinery • Machinery by municipality • Waste and recycling machinery • Industrial and handling machinery such as fork-lift, trucks, etc. • Forestry machinery The quality and high-performance of CLEANFIX reversing fan systems have been endorsed by market-leading manufacturers, such as AGCO (FENDT, VALTRA), CNH (NEW HOLLAND, CASE IH), JCB, JOHN DEERE, KOMATSU, MERCEDES-BENZ, MERLO, BOMAG FAYAT GROUP, CATERPILLAR, KRONE, MANITOU, CLAAS, HAGIE and OXBO. All of these manufacturers either include CLEANFIX fans as a standard or optional application in their product offering. CLEANFIX has three global engineering and manufacturing sites and serves customers in more than 25 countries. Efficient Radiator Cleaning Solution A clean radiator saves fuel, time, and protects from overheating. More and more radiators and coolers are being installed in modern industrial machinery. The problem: Your fans are in tough continuous use. Like vacuum cleaners, the fans quickly plug the coolers and grill screens. This results in additional costs of several thousand dollars per year through increased fuel consumption and downtime. The solution: Our innovative reversible fans reverse the airflow to powerfully clean out radiators and screens at the operator’s convenience. CLEANFIX increases the reliability, productivity, and fuel efficiency of your machine. CLEANFIX is the only fan which provides a high pressure, high cleaning power reverse airflow. What this means to you: Using CLEANFIX ensures a relaxed and comfortable work environment. You will never need to exit the cab to clean a radiator or be inconvenienced by reduced air-conditioning performance. A variety of solutions to meet your specific needs All of our products are carefully engineered for today’s tough working conditions. Please click on the links below to learn more about our unique cooling and cleaning solutions. Cleanfix SC - Standard Control Cleanfix VP - Variable Pitch Cleanfix SF - Seasonal Reversing Fan Cleanfix PT/HT - Pulstronic / Hytronic Control Electronics Clean-Genius For more information: www.cleanfix.org . DOWNLOAD CLEANFIX BROCHURE Cleanfix has been an 'approved allied supplier' for John Deere since 2016 Hägele GmbH and its patented Cleanfix system products were tested by John Deere and deemed to be so good that Hägele GmbH has now received the status of 'approved allied supplier'. This status means that Cleanfix reversible fans can be installed in the John Deere tractors 6145R to 6215R by John Deere dealers, without voiding any warranty on the vehicle. DOWNLOAD CLEANFIX - JOHN DEERE BROCHURE Reversible Fans For Radiator Cleaning Clean radiators. Save fuel. Cleanfix in agriculture: DEUTZ-FAHR 7250 TTV Warrior tractor. CASE JX 95 equipped with CLEANFIX reversible fan. CASE STX Steiger 435 equipped with CLEANFIX reversible fan. CASE IH 7120 epuipped with Cleanfix reversible fan. For more information about products, accessories or prices, please contact us.

AgriTotal is New Zealand's exclusive importer of Vervaet Hydro Trike Universal Spreader. View their online showroom today. VERVAET Universal spreader In recent years Vervaet and the French Panien have joined together in a productive partnership that capitalises on both companies' strengths. Vervaet has 25 years' experience with advanced self-propelled machines, and Panien is a well-known French manufacturer of spreaders and other equipment. For some time the companies have worked to merge these two premium-quality products into a single formula. The result: the Vervaet Hydro Trike Universal Spreader. Vervaet builds the self-propelled base machine in its factory, and Panien manufactures the spreader component. These are fitted together in the final stage. The controls of the Panien spreader are fully integrated into the cab of the Vervaet. This means that all functions can be operated via the drive handle, and the Hydro Trike standard touch screen monitor is equipped with software specially developed for spreading. WATCH VIDEO VIEW GALLERY For more information about products, accessories, or prices, please contact us.

AgriTotal is New Zealand's exclusive importer of TRILO groundskeeping machines and accessories. TURFTICK 3500 TURFTICK 2316 TURFTICK 1016 TURFTICK 10165 TURFTICK 1040 TURFTICK 2516 BIGSLAB 3040 MowTick R5582 Rotary Mower The MowTick® R5582 is an easy to maintain all-round mower with five cutting decks, each with five blades. The MowTick has been designed specifically to cater to the needs of turf farmers. The machine allows TurfFarmers to mow their turf with great a high speed of 10 km/h. The high power of the machine prevents the build up of heaps of cuttings, and thereby safeguards the high quality of your turf. Features The MowTick® R5582 can be controlled from the tractor. One of the unique features of the MowTick® R5582is that in the transporting position the MowTick® Rotary not only folds upwards but backwards as well. This results in a low transporting height making it easy to move around. Features The MowTick® R5582 has a cutting width of 8.20 meters and because the decks are placed at an angle behind each other, the range of 8.20 is optimized. Dimentions Transport mode Hight: 3.23m Width: 2.95m Length: 6.20m Advantages The low transport height ensures easy transport High power and high speed of mowing Compact design Easy maintenance and user-friendly Specifications Cutting width 8.25 meters Power requirements Approx. 60 kw and single hydraulic connection Capacity 8.3 hectares per hour at a speed of 10 kilometer per hour Number of mowing decks 5 Number of blades per mowing deck 5 Enquire