top of page

VERVAET hydro trike

The success of the simplicity or the simplicity of the success?

Vervaet developed the hydro trike together with and with the demand from contractors, who were experienced in handling slurry. The concept was right from day one ,and the machines conquered the market in a few years time. Now , more then 20 years later, the Hydro Trike is still the favorite machine of the contractors that own them, the drivers that operate them, and the farmers who have the machine on their fields. We proudly present: The Vervaet Hydro Trike.

Why choose the Hydro Trike?
One time over the soil

One time over the soil With its three wheel (trike) principle, the soil over the entire working width is equal hitted. This results in a less damaged structure and a better result.

Well thought

The Vervaet Hydro Trike has since his birth in 1990 the same principle of working. The whole technique of the slurry-cycle is still today in the same way used like in 1990. Unlike many others who time after time with a 'renewal' and / or change. Vervaet believes in the principle of hydro trike and many of us which is reflected in our leadership.


The economic sustainability of the Hydro Trike is of unprecedented proportions. Maintenance costs are, by more than 20 years development, reduced to a minimum. That results in a residual value unmatched by none. The characteristics to be in economically sustainable business with your machine.




Hydro Trike Drive
Simple, but high-tech just the same

As simple as it all seems, as modern and high tech it really is. It begins with the DAF Paccar engine which already produces a sturdy 465 HP at only 1400RPM. In good conditions, the maximum power is not needed so the machine can be operated at an even lower speed of 1250 RPM.

The front wheel is hydraulically steered and driven, equipped with a disc brake. The rear axle is a combination of a mechanical transmission with 2 speeds, which is driven by an infinite adjustable hydro motor. The oil flow of the 2 pumps is divided to the front and rear wheels, so it is always running at the right speed. The amount of traction on the front or rear is easily adjusted with a button on the drive handle power is not needed so the machine can be operated at an even lower speed of 1250 RPM.

One adjustable pump drives the slurry pump. Two adjustable Sauer Danfoss pumps provide the traction drive. The fourth pump is adjustable for the cutting unit.

HT Slurry
Slurry Cycle

The cyclone slurry cutter is positioned behind the slurry pump. This setup is chosen to reduce the resistance to in the suction side of the slurry pump. That is why the tank can be filled quickly.


While emptying the tank, the slurry pump keeps running. On the headland the cutting unit switches from injecting to flushing. This concept ensures that the cutter is always cleaned during flushing. Time-consuming blockages are prevented.

When switching back to injecting, there is pressure instantly in the elements of the slurry injector.

In one sentence: With the hydro trike, it’s all about output.

HT Tri Control

With the multifunctional full-color touch screen (26.5 cm), the driver has all necessary information in the main Menu within a blink of an eye.

  • Speed

  • Set cubic meters

  • Actual cubic meters

  • Tank

  • Tire Pressure

  • Slurry pump speed

  • Hyd. Pressure slurry pump

  • Hyd. Pressure pump drive system

  • Hyd. Press cutter

  • Set front and rear traction

  • Capacity in cubic meters / hour

  • Engine temperature

  • Engine rpm

  • Fuel consumption

  • Fuel tank

  • Time

HT Lighting

Standard equipped with 18 work-lights in LED or Xenon; it doesn’t matter it’s a day- or a night-job.

For more information about products, accessories, or prices, please contact us.

bottom of page