top of page
Zaaimachine_maredo_MT_418_jean_heybroek-8 (1).jpg
Maredo_MT_200_serie_jean_heybroek_H-3-1280x720.jpg
Zaaimachine_maredo_MT_418_jean_heybroek-15.jpg
Scarifier MT200

Scarifier Maredo MT200

Scarifier MT200. A wide and flexible scarifier behind the tractor. Thatch in a turf can be quite a problem. Too much organic matter in the topsoil of a turf can make turf susceptible to disease. The MT200 scarifier has been developed to remove thatch, but can also be used for light vertical mowing. Specifically developed for use on fairways, tees, greens and sports fields.

Technical specifications

  • Working width 1900 mm

  • Working depth 0-25 mm

  • Weight 370 kg

  • 3-point hitch CAT I+II

  • Required tractor power 25-40 hp, 540 PTO

  • Knife thickness 2.3 mm

  • Inter-blade distance 40 mm

  • Working speed up to 6 km/h

Characteristics

  • Follows all curves perfectly thanks to the flexible main frame

  • Ideal for use on sports fields, fairways, tees and greens

Each of the three scarifying units is suspended flexibly and can follow the slopes individually. All units are mechanically driven via PTO shafts and maintenance-free chains. The central main frame is equipped with two pivot points, which makes turning possible.

The scarifying blades rotate against the direction of travel, removing more material with minimal damage to the turf. All units have quick adjusters for depth adjustment for easy depth changes. The standard 2.3 mm thick blades are equipped with hardened blade tips. The depth adjustment is variably adjustable from 0-25 mm. You can therefore choose the intensity of the scarifying yourself.

Aerator Maredo MT210 VibeSpike-Aerator

Aerator MT210. The Maredo MT210 is a fast top layer aerator. Three MT210 units are mounted on a flexible main frame. You can even make perfect turns with it.

Technical specifications

  • Roller suspension on the front and rear of the unit

  • Working width 1900 mm

  • Working depth 25-60 mm

  • Weight per unit 60 kg

  • Main frame weight 120 kg

  • 3-point hitch CATI+II

  • Min. power tractor 25-40 hp, 540 PTO

  • Thickness spikes 4 mm

  • Distance spikes 52 mm

  • 320 holes per m²

  • Working speed up to 8 km/h

  • Drive via a double V-belt transmission

Characteristics

  • Quickly aerate the top layer

  • Ideal for sports fields, fairways, tees and greens

  • About 320 holes are drilled per square meter

  • Low maintenance, cleaning with compressed air

  • Working depth can be easily adjusted using height adjusters

  • Simple depth adjustment; manually adjustable without tools

The MT210 units have a flexible suspension for optimal ground contour following and are driven via PTO shafts and belts. All spike sections vibrate through the driven main camshaft. The vibration drives the spikes through hard layers and also leaves a nice clean hole pattern, with no damage. The topsoil is loosened from the spikes by the vibration. The spikes roll over stones and other hard objects.

Aerator MT210

Milling Cutter Maredo MT170 FlexFraze-Mower

Milling unit MT170. Suitable for use behind a tractor. Based on the principle of our ST170 FlexFraze cutting head, which is very popular. A FlexFraze mower with a flexible cutting head that follows ground contours. It is an excellent mower for cleaning the edges of greens, for example. Our specially designed blades make the difference and perfectly remove organic material on natural (cold season) grasses, semi-artificial and fully artificial grass pitches. The question arose whether we could also come up with a tractor version. Working width 190 cm. Working depth 0-25 mm. Weight 420 kg. 3-P hef CAT I&II. Required tractor power 25-40 hp, PTO540. Working speed up to 3 km/h.

Technical specifications

  • Working width 190 cm

  • Working depth 0-25 mm

  • Weight 420 kg

  • Suitable for 3-P lifting CAT I&II

  • Required tractor power 25-40 hp + PTO840

  • Working speed up to 3 km/h

Characteristics

  • Follows all curves perfectly thanks to the flexible main frame

  • Ideal for use on sports fields, fairways, tees and greens

Milling Cutter MT170

Seeder Maredo MT410-418 VibeDisc-Seeder

The MT410 /MT418 are dedicated disc seed drills. Heavy vibrating cutting discs first pre-cut a slot. Two discs placed in a V open the pre-cut slot. The seed is guided between these two discs, straight into the slot. The rear roller closes the slots. The seed rate is adjustable by changing gears. The MT410 is equipped with a metering shaft for Bentgrass. The MT418 is equipped with a metering shaft for fescue/rye.


Model MT410 is suitable for Bentgrass.
Model MT418 is suitable for Fescue/Rye

Technical specifications

  • Working width 190 cm

  • Working depth 0-20 mm

  • Weight 580 kg

  • Space between discs 42 mm

  • Capacity seed box 6 kg per head

  • Working speed up to 6 km/h

  • Dosage MT410 0.4-3.0 gr/m²

  • Dosage MT418: 5-15 gr/m²

Characteristics

  • Follows all curves perfectly thanks to the flexible main frame

  • Ideal for use on sports fields, fairways, tees and greens