MT200 Flex-Verticutter
When 3 x MT200 Flex-Verticutter heads are mounted at the MFrame 319, we get a verticut machine behind the tractor. All heads are mechanically driven and can follow the undulations individually. We can even make curves. The machine can be used for a shallow cut (verticut) or a deeper cut (scarifying).
SPECS
The MT200 Flex-Verticutter head for Behind the Tractor is a heavy duty head with the following specifications:
-
Easy depth adjustment by hand (no tools required).
-
At the front side a support roller, at the rear support wheels.
-
Standard we have mounted carbide tipped 2 mm thick cutting blades.
-
The standard disk spacing is 30 mm.
-
The blades counter rotate against driving direction. This works more effective as the material is not dragged down into the slit but get’s lifted out by the blades.
-
The blade rotation direction can be changed by turning over the gearboxes.
-
The heads are driven by maintenance free drive chains positioned on the side of each head.
-
The MT200 is a maintenance friendly machine. Maintenance includes; a once a year oil change of the gearboxes, greasing all ten lubrication points and cleaning with compressed air after each use.
-
Working depth 0-25 mm 0- 1”.
-
The weight is 55 kg = 110 lbs per head.
WATCH VIDEO
GALLERY
![]() | ![]() | ![]() |
---|---|---|
![]() | ![]() |
For more information about products, accessories or prices, please contact us.