Leafblower BL400
-
Compact with a high output.
-
Fits on a wide range of vehicles and mowers.
-
Can be mounted both on the front and back of a vehicle.
-
Anti-scalp roller.
-
Can be driven both hydraulically and by means of a PTO drive shaft.
-
Robust construction.
-
Reverse exhaust spout is hydraulically operated from the driver’s seat.
Clearing roads, verges or parking places, etc.
Leafblower BL400 is a unique, flexible, and quiet leafblower that fits well on the front or rear of many vehicles. The 180° swiveling blow-off bend is hydraulically operated from the driver’s seat. This makes it easy to direct the airflow. Despite its high power, the BL400 has a remarkably low noise level, which is pleasant for the surroundings and the driver. The BL400 is driven either hydraulically or by means of a PTO shaft. The impeller requires a power greater than >25 hp (19 KW).
Characteristics BL400:
-
low noise level
-
blower nozzle is 180 rotatable
-
centred blower nozzle
-
sturdy impact protection bar
-
anti-scalping roll
Leafblower B7
-
Compact and lightweight with a high power
-
Anti-scalp roller
-
Driven by PTO drive shaft
-
Robust construction
-
Reverse exhaust spout is hydraulically operated from driver seat
For leaf clearing of roads, verges or car parks, etc.
Leafblower B7 has, thanks to its enormous power, a long reach and can clean large areas in little time. The reverse exhaust spout is hydraulically adjustable from the driver’s seat, which makes its operation very easy. When changing direction of travel and driving back, you can still blow in the same direction using the reverse exhaust spout. You can blow to the left or right of the machine, and, if you set the exhaust spout at half-height, you can blow on both sides and clean your paths and roads in one pass. The Anti-scalp roller ensure that the blower follows the contours of the ground perfectly and they protect both the exhaust spout and the turf. The fan is driven by a PTO drive shaft attached to the tractor and requires an output of 30 HP (22 kW).
Leafblower BL960
-
Compact and light with an enormous power.
-
Adjustable gauge wheels and anti-scalp roller.
-
Driven by PTO drive shaft.
-
Robust construction
-
Reverse exhaust spout hydraulically operated from the tractor
Clearing leaves from large areas such as roads, squares, event areas, or parking lots
Leafblower BL960, with its very high output and far-reaching airflow, is ideally suited for cleaning wide large areas. The reverse exhaust spout is hydraulically adjustable from the driver’s seat. This makes its operation very easy. When changing the direction of travel and driving back, you can still blow in the same direction using the reverse exhaust spout. You can blow to the left or right of the machine. And, if you set the exhaust spout at half height, you can blow on both sides. Thus, cleaning your paths and roads in one pass.
The large gauge wheels and anti-scalp roller ensure that the leaf blower perfectly follows the ground contours. And it also protects both the exhaust spout and the turf. The fan is driven by a PTO drive shaft attached to the tractor and requires an output of 50 HP (37 kW).